Electronic Forklift Handle Throttle Forklift Accelerator 24V 48V ET-126

Total Variations : 1

Desciption : 

Electronic Forklift Handle Throttle Forklift Accelerator 24V 48V ET-126

Specifications:

 * Input voltage (volt): 24-48V DC

 * Signal output: 0-5V

 * Maximum throttle output: 5.3V

 * Minimum throttle output: 0V

 * Maximum deadband at zero throttle: 10 degrees

 * Maximum deadband at full throttle: 10 degrees

 * Forward/Reverse current: 1.5A max

 * Symmetrical throttle response in both directions

ET-126 MCU throttle assemblies provide an analog 0-5V output proportional to throttle position for interfacing with 

PMC motor speed controllers.

This new MCU version replaces the old ET-126 throttle. They are functionally identical, but the MCU version has a microprocessor,

providing more accurate speed signal output.

Key Features:

 * Model: ET-126 MCU

 * Hall effect sensors and solid state MOSFET contactor drivers minimize moving parts, thereby increasing reliability and Mean

Time Between Failure.

 * Symmetrical throttle response in both forward and reverse directions ensures smooth, concise acceleration and deceleration in

both directions.

 * Minimal deadband areas at both zero and full throttle positions eliminates hesitation when beginning to accelerate or

decelerate.

 * Environmental protection of major components through an epoxy layer over the circuit board assures operation in harsh

environmental conditions.

 * Wig-wag type throttle returns the throttle to neutral for convenience and safety.

 * Input polarity protection to ensure no damage occurs to the throttle if it is incorrectly wired.

 * Easy to install.